Stamped Leather Coaster
Magnesium stamping tool was used to create stamped image into leather
Stamping Die Film
This film shows the fine line created in magnesium stamping die for leather project.
Magnesium Stamping Tool
Stamping die made from magnesium plate.
Routered Acrylic Lens
.220″ thick acrylic routered and milled. Lens height is .220″ and milled outer edge around lens is .110″ thick.
PolyMetal™ Sign
Router cut part for a customer. PolyMetal™ is comprised of a recycled thermoplastic core sandwiched between two sheets of finished aluminum on two sides. The recycled thermoplastic core lends itself to resisting moisture. PolyMetal™ panels also feature the ability to digitally print direct to the panel, thereby allowing for complete design flexibility.
PolyMetal™ Side View
Router cut part for a customer. PolyMetal™ is comprised of a recycled thermoplastic core sandwiched between two sheets of finished aluminum on two sides. The recycled thermoplastic core lends itself to resisting moisture. PolyMetal™ panels also feature the ability to digitally print direct to the panel, thereby allowing for complete design flexibility.
Steel Rule Tooling for Silicon
Tooling made for cutting 70 mil thick polypropylene.